CrimeStopper SafetyPlus SV-9153 User Manual

AUTO DIMMING
Le guideline rota on Long press to set guide line Right guideline rota on
• • • •• • • • • • • • • • • •
• • • • • • • • • • • • The auto-dimming of our mirror works automatically
•• •• • • • •
when you start the engine, then the indicator light also
• • • • • • • • • • • • • • • •
lights. The light sensor in the back of the rearview mirror
• •• • • • • • • •
will always detect the ambient light. The auto-dimming
Check Surrounding for safety
doesn't work in the broad day for the adequate daylight.
Long press to set guide line
Le guideline move Right guideline move However, when night falls and the ambient light is below
• • • •• • • • • • • • • • • •
• • • • • • • • • • • • 5lux, the auto-dimming starts to work and automatically
•• •• • • • •
dims to eliminate the glare of rearward-approaching
• • • • • • • • • • • • • • • •
vehicles. Furthermore, the degree of brightness of the
• •• • • • • • • •
auto-dimming glass depends on the level of the light.
Check Surrounding for safety
The stronger the light from the back of the car is, the
darker the glass is. Hence it protects drivers from
OEM MARKET MOUNT
becoming dizzy and avoids car accident.
the light sensor from the back of
mirror detects the ambient light
MANUAL DIMMING
when the mirror detects the high beam light from
the coming car at the back, you just need to adjust a
switch so that the mirror's angle has been changed,
which can avoid the high beam light in your eyes.
Auto-dimming bleaching state
Turn off Turn on
Auto-dimming working state
SPECIFICATIONS
Description
Color Pixel Power
Screen Display Aspect
Mode number
Depth Consumption
Model Size Screen Resolution Pitch (mm)
480(H)
TFT-
SV-9153 4.3" 16 : 9 16.7M 8W
LCD ×272(V)
320(H)
TFT-
SV-9154 3.5" 4: 3 16.7M 4W
LCD ×240(V)
TFT- 480(H)
SV-9156 4.3" 16 : 9 16.7M 8W
×272(V)
LCD
TFT- 480(H)
SV-9157 4.3" 16 : 9 16.7M 8W
LCD ×272(V)
TFT- 480(H)
SV-9156CT 4.3" 16 : 9 16.7M 8W
LCD ×272(V)
TFT- 480(H)
SV-9161 4.3" 16 : 9 16.7M 8W
LCD ×272(V)
TFT- 480(H)
SV-9164 16 : 9 16.7M 8W
4.3"
LCD ×272(V)
480(H)
TFT-
SV-9162 4.3" 16 : 9 16.7M 8W
LCD ×272(V)
480(H)
TFT-
SV-9163 4.3" 16 : 9 16.7M 8W
LCD ×272(V)
WIRING OPTIONS
Use Backup Camera only (1-1)
Connect Red wire to Reverse Light (+12V),
Black to Ground.
5M cable
Back up to camera
Red to ACC +12
Black to GND
Black to GND Red : camera power to reversing power
1-1
PARKING SENSOR
9
5
2
6 7
3
Video in
4
2
3
1
4
front light sensor detects the light
from rearward-approaching vehicles.
6
5
OE-STYLED HIGH BR IGHTNESS R EAR VIEW MIR R OR MONITOR
Use Backup camera and Video input (1-2)
Red wire to Acc Power and Black wire to Ground.
1.Under power-on condition: when reverse gear is engaged, the system
Working Video
Signal System
Voltage Input automatically switches from video sources (such as GPS) to backup
camera video, and when not engaged , it switches back automatically.
VIDEO-IN to GPS
/DVD (default) Refer to Optional Wiring Diagram 1-2.
PAL/AUTO/NSTC
CAMERA to
DC 12V
backup camera.
2.Under power-off condition: When reverse gear is engaged, the system
VIDEO-IN to GPS
automatically switches to the camera signal and displays backup video.
/DVD (default)
DC 12V PAL/AUTO/NSTC
CAMERA to
When not engaged, it switches off automatically.
backup camera.
VIDEO-IN to GPS
3.PWR Button on middle of the Mirror
/DVD (default)
DC 12V PAL/AUTO/NSTC
CAMERA to
backup camera. 1) Camera mode ( in reverse ), this button is used to adjust the
VIDEO-IN to GPS
backlight of the monitor.
/DVD (default)
DC 12V PAL/AUTO/NSTC
CAMERA to
backup camera. 2) Video mode, this button is used to turn monitor on/off.
VIDEO-IN to GPS
/DVD (default)
DC 12V PAL/AUTO/NSTC
CAMERA to
backup camera.
SUPER HIGH BRIGHTNESS SCREEN WITH
VIDEO-IN to GPS
AUTO ADJUSTMENT
/DVD (default)
PAL/AUTO/NSTC
DC 12V
CAMERA to
backup camera.
When video from backup camera is displayed on the screen, the screen will
VIDEO-IN to GPS
/DVD (default)
automatically adjust brightness with the ambient light. It can ensure that
DC 12V PAL/AUTO/NSTC
CAMERA to
you can see the screen clearly under sunshine when the light is super
backup camera.
bright; the screen also can automatically become dimmer, which is enough
VIDEO-IN to GPS
/DVD (default)
DC 12V PAL/AUTO/NSTC to protect you from the sudden light from the turned-on screen at night.
CAMERA to
backup camera.
VIDEO-IN to GPS
/DVD (default)
DC 12V PAL/AUTO/NSTC
CAMERA to
backup camera.
weak light
1-2
CAMERA
super bright
GM OnStar and Hyundai Bluelink
5
3
9
5
8
1
3
10 Rearview mirror monitor Mirror monitor cable Extension cable
8
9
8
11
Green to back
11 10
Camera Parking sensor
Top view display style
11
7
10
Note: OnStar and BlueLink systems are the patent and trade
mark of the GM and Hyundai Corporations
10P
11
in come from mirror
10
There are two styles of OnStar connectors that are compatible
with the factory rear view mirror. These connectos are a 10-pin
and 16-pin connector. Our OnStar mirror's connector is 10 pins
which will match the original 10-pin OnStar connector. If your
vehicle has the 16-pin connector, we have an adapter that will
convert the 16-pin connector to a 10-pin connector
ABOUT COMPASS
Digital Compass Calibration
This compass can be calibrated by driving your vehicle in several
complete circles. A quick guide is stated as below. If the vehicle's
compass headings become inaccurate, the compass can be manually
calibrated by
1.Press the enter into "SETTING" menu, and press button
COMPASS ZONE
to choose the "ANGLE". you can press to adjust the angle. 2-1
(Using the map below to find your geographic location, note the zone
that you are located)
2. Press to select the "CALIBRATION", the default mode is "OFF",
press , select the "AUTO" 2-2
3. Drive your vehicle in at least 2 circles' counterclockwise, allowing 45
seconds to complete one circle
4. For best calibration, keep your circle radius close to 5 meters and
speed less than 10km.
CALIBRATION
5. Press to select the "CALIBRATION", press ,
5.
select the "OFF"
26
24 sweden
22
• •• •• •• •• •• •
Britain
18
Franch
• • • • • •
16 Spain
A
14
los Angeles
12
12 Peru
14
Brazil
16
18 South Africa
22
24
26
28
34
44
54
66
Rear View Mirrors
Controls for GM OnStar and Hyundai BlueLink systems
from your vehicle
icle
16Pin come from your veh
10Pin 16Pin
Jumper harness
ABOUT TEMPERATURE
How to set
S E T T I N G
C O M PA S S Z O N E 00
C A L I B R AT I O N O F F 1.Press the enter into "SETTING"menu, and press
F R O N T S E N S R O 01
B A C K S E N S O R 01 choose the " TEMP UNIT".press
o F
T E M P U N I T
00
S E T T I N G
2-1
A N G L E 00
C A L I B R AT I O N A U T O
F R O N T S E N S R O 01
B A C K S E N S O R 01
o F
T E M P U N I T
S E T T I N G
O C
TEMP UNIT
C O M PA S S Z O N E 00
C A L I B R AT I O N A U T O
F R O N T S E N S R O 01
B A C K S E N S O R 01 3-1
o F
T E M P U N I T
Temperature sensor installation
AUTO
2-2 Locate the temperature sensor between the front of the radiator and the
front bumper
Locate edge of sheet metal or plastic shield, and slide metal clip over
edge until secure.
26
24
22
• •• •• •• •••• • Sensor should be in the flowing of fresh air. Do not locate it next to a
18
16
heated engine part.
14
12
• •• •••• •• •
印度
Australia
WHAT THE REGULAR GUIDE LINE IS
Regular guide line is fixed. But installation sites of cameras are different
as well as car size. The fixed guide line is not accurate enough for drivers.
There will be a great difference between regular and fixed guide lines and
button to
o o
car's real guide lines, especially when camera is mounted on the left or
you can switch F to C 3-1
right side of car backside. It may cause accidents.
HOW TO ADJUST THE GUIDE LINE
According to the site of standard reference line, we can put reference
objects such as desks in the back area of car. Compared with the marked
reference objects, we can adjust the sites and angle of two guide lines
displayed on the monitor. You will get the accurate and safety guide lines
once they coincide with the reference objects.
Long press setting button is to enter into "guide line adjustment" mode.
The upper half of the remote is to adjust left guide line while the bottom
half of the remote is to adjust the right one. The up, down, left and right
buttons are to adjust the location of guide lines. The clockwise rotation
contra rotation buttons are to adjust the angle of guide lines. It is easy to
operate and calibrate.