Configuration - Siemens FDOOT241-A9-Ex Technical Manual

4.2.5
Building Technologies
Fire Safety
Step 2: Replacing the control panel and changing over to FDnet-Ex/C-NET-Ex protocol

Configuration

The multiple protocol detectors are configured directly on the control panel or using
the relevant configuration software for the fire control panel.
You will find information about configuration with the software for the respective fire
detection system in the following documents:
Fire detection
system
FS20
FS720
See chapter 'Applicable documents [➙ 8]'.
Software
SintesoWorks
Cerberus Engineering Tool
Undertaking modernization
Document ID
009078
A6V10210424
A6V10443621_a_en_--
2014-09-01
4
23