Siemens FDOOT241-A9-Ex Technical Manual page 21

Non-Ex Area
FDnet
FDCL221-
Ex
FDnet
FDCL221-
Ex
Non-Ex Area
C-NET
FDCL221-
Ex
C-NET
FDCL221-
Ex
Building Technologies
Fire Safety
Step 2: Replacing the control panel and changing over to FDnet-Ex/C-NET-Ex protocol
Migration to the following protocols can take place, depending on the control panel
being used:
FDnet-Ex: Use the multiple protocol detector FDOOT241-A9-Ex
Ex Area
FDnet-Ex
FDOOT241
-A9-Ex
FDnet-Ex
C-NET-Ex: Use the multiple protocol detector OOH740-A9-Ex
Ex Area
C-NET-Ex
OOH740
-A9-Ex
C-NET-Ex
If the national and regional regulations in your country permit automatic fire
detectors and manual call points to be operated on a single stub, all detector
types can be operated on a joint stub.
Undertaking modernization
FDOOT241 FDOOT241
-A9-Ex -A9-Ex
FDM223-
Ex
OOH740 OOH740
-A9-Ex -A9-Ex
FDM223-
Ex
4
FDOOT241
-A9-Ex
OOH740
-A9-Ex
21
A6V10443621_a_en_--
2014-09-01