Siemens COMBIMASTER 411 Getting Started Manual page 20

Certificates
To submit any suggestions for improvements, please visit the Siemens
Standard Drives Web Site at
Printed in England
20
MICROMASTER 411 & COMBIMASTER 411
Getting Started Guide – 07/05
European Low Voltage Directive
The MICROMASTER product range complies with the
requirements of the Low Voltage Directive 73/23/EEC as
amended by Directive 98/68/EEC. The units are certified for
compliance with the following standards:
EN 60146-1-1
EN 60204-1
European Machinery Directive
The MICROMASTER inverter series does not fall under the
scope of the Machinery Directive. However, the products
have been fully evaluated for compliance with the essential
Health & Safety Requirements of the directive when used in a
typical machine application. A Declaration of incorporation is
available on request.
European EMC Directive
When installed according to the recommendations described
in this guide, the MICROMASTER fulfils all requirements of
the EMC Directive as defined by the EMC Product Standard
for Power Drive Systems EN61800-3.
Underwriters Laboratories
UL and CUL LISTED POWER CONVERSION EQUIPMENT
5B33 for use in a pollution degree 2
Not all inverters currently have UL Approval. UL listing
can be determined by examining the inverter's rating
label.
ISO 9001
Siemens plc operates a quality management system, which
complies with the requirements of ISO 9001.
Semiconductor inverters - General
requirements and line commutated
inverters
Safety of machinery - Electrical equipment
of machine
http://www.siemens.de/micromaster
Siemens plc
Automation & Drives
Standard Drives
Division
Varey Road,
Congleton, CW12 1PH
United Kingdom