Midea 1034N1A Instruction Manual page 20

OPERATION INSTRUCTION
a. Open the door，press number button "1" for 5 seconds,"PROGRAW" displays.
b. Press number button "3", after two seconds, the screen will display the related
time.
c. Press "1","2","5" to input the cooking time. "1:25" displays.
d. Press "
e. Press "
f. Press "5", "4","0" button, "5:40" displays.
g. Press "
h. Press " " button to save the program.
11.Double Quantity cooking
1) If the "X2" button is pressed in Ready Mode, followed by the starting of a Preset
Program, or if the "X2" button is pressed in 5 secondes of starting a Preset
Program, the oven will start cooking with the quantity preset cooking time.
2) Press "X2", "DOUBLE" displays. When press number buttons, the screen will display
the quantity preset time.
For example, number button "5" and its preset time is 1 minute. Then press "X2", then
time will change to 1:00*2=2 (2 minutes)
12. Factory-default setting
In Ready Mode, presssing "
Factory-default Setting Mode.
1) Press " " and " 0 ", the beep tone sounds once,and the screen will display
"CHECK" If it is in the Factory-default Mode, the screen will display "11" , after three
seconds, the oven turn to the Ready Mode . Or press"
ang back to ready back in the process of display.
If not in the Factory-default Mode, the screen will display " 00 ", press"
Factory-default Mode,the screen will display " CLEAR ". the beep tone sounds once,
after self-testing, the screen will display""11or ""00.
2) If do not press "
10 seconds.
Note: Be careful in the operationas it will restore all configure to Factort-default Mode.
" button and " 1:25 70" displays. The first stage is finished.
", "STAGE-2" displays.
" button and "5:40 50 " displays. The second stage is finished.
" and"0" simultaneously will put the oven into
" when the screen display " 00 ",the setting will cancel after
1 9
" to cancel the display
"to the