Midea 1034N1A Instruction Manual page 17

OPERATION INSTRUCTION
5. Pause Mode
1) While in cooking state, if the door is opened and then closed, or if the "
is pressed, the oven will enter Pause Mode.
2) While paused,the screen will display the remaining cooking time.
3) In Pause Mode, if the "
Ready Mode; If the "
End of Cook Cycle Mode
6.
1) After the cooking time has expired, the oven shall go into the End of Cook Cycle
Mode. And the screen will display " DONE ".
2) If either User Option OP:11 or OP:12 is selected, the oven shall continue to sound until
opening the door or pressing the "
the 3 seconds beep, the oven shall display "DONE". After the beep, "READY" will display
and the oven will enter Idle Mode without any operation for a period of time.
7. User Option Mode
This allows the user to change the configurations of the oven.
1) Open the oven door and press "2" pad for 5 seconds. The beep tone sounds once and enter the
User Option Mode.
2) The screen displays "OP: - -".
3) Press corresponding number button to enter related mode setting. (refer to Appendix A)
For example: to set the voice of the beep tone to medium. Press " 2 ", "OP:22" displays.
If you want to change it, keep pressing "2", the screen displays "OP:20", "OP:21","OP:22",
"OP:23", "OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
Note: a. During setting process, press "
enter Ready Mode.
b. If " " button not pressed at the last step, the program cannot be saved but stay
at previous state.
" button is pressed, the oven shall immediately enter
"button is pressed ，the oven will go into working mode.
"pad; If User Option OP:10 is selected, after
" to enter Door Open Mode. Close the door will
1 6
" pad