Charging Indicator - Samsung VP-DX100H User Manual

preparation
Charging the battery pack
• Use IA-BP80W battery pack only.
• The battery pack may be charged a little at the
time of purchase.
1. Slide the POWER switch downwards to turn off
the power.
2. Open the LCD screen and attach the battery pack
to the DVD camcorder. page 16
3. Open the DC IN/USB/AV jack cover.
4. Connect the AC power adaptor to the DC IN jack
of your DVD camcorder.
5. Connect the AC power adaptor to a wall socket.
• The ACCESS/CHG (charging) indicator
lights up in orange and charging starts. The
ACCESS/CHG (charging) indicator lights up in
green when the battery is fully charged.
6. Once charged, disconnect the AC power adaptor
from the DC IN jack on your DVD camcorder.
• Even with the power switched off, the battery pack will still discharge if it is left attached to the DVD camcorder.
It is recommended that you remove the battery pack from the DVD camcorder.

Charging indicator

The colour of the ACCESS/CHG (charging) indicator indicates the power or
charging state.
- If the battery has been fully charged, the charging indicator is green.
- If you are charging the battery, the colour of the charging indicator is orange.
- If an error occurs while the battery pack in charging, the charging indicator
blinks orange.
18_ English
POWER switch