Samsung VP-DX100H User Manual page 116

troubleshooting
Adjusting the image during recording
Symptom
Focus does not adjust
automatically.
The image appears too bright or
flickering, or changes in colour.
Image's colour balance is not
natural.
Playback on your DVD camcorder
Symptom
Using the playback (Play/Pause)
function does not start playing.
The Skip or Search function does
not work properly.
110_ English
Explanation/Solution
• Set "Focus" to "Auto." page 70
• The recording conditions are not suitable for auto focus.
Adjust the focus manually. page 70
• The lens is dusty on the surface. Clear the lens and check the focus.
• This may occur when you make a recording under a fluorescent, sodium or
mercury lamp.
Cancel "Scene Mode (AE)" to avoid or minimise the phenomena. page 65
• White balance adjustment is required. Adjust to the proper "White Balance."
page 66
Explanation/Solution
• Press the MODE button to set to the Play mode.
• Images recorded using another device may not be played on your DVD camcorder.
• Select a proper storage media. (VP-DX103( i )/DX104/DX105( i ) only) page 30
• Check out the memory card compatibility. page 52~54
• If the temperature inside the camcorder is too high, it may not function properly.
Turn the camcorder off, and turn it on again a little later.