Troubleshooting; Warning Indicators And Messages - Samsung VP-DX100H User Manual

troubleshooting

TROUBLESHOOTING
Before contacting a Samsung authorised service centre, perform the following simple checks.
They may save you the time and expense of an unnecessary call.

Warning indicators and messages

Overall
Message Icon
Low Battery
Cover is opened
Discs
Message Icon
Insert Disc
Disc Full
Finalised Disc
Not Supported Disc
Disc Error
Write Error
104_ English
Informs that...
The battery pack is almost discharged.
Cover is opened.
Informs that...
There is no disc in DVD camcorder.
There is not enough disc space.
The disc is finalised.
The disc is not recognized in the DVD
camcorder. The disc has been finalised
in a camcorder manufactured by another
company.
File system does not match to the disc.
Disc is formatted in the PC.
Your disc or memory card has some problems
in writing data.
Disc is shocked while movies is being
recorded onto the disc.
Action
Replace with a charged battery or connect the AC power
adaptor. (If the AC power adaptor is connected when "Low
Battery" is displayed, the power is turned off and the charging
starts.)
Close the cover.
Action
Insert a disc.
Change to a new disc. Erase recorded image.
To record on a DVD-RW/+RW disc, unfinalise it.
The supported discs are DVD-R, DVD+R DL, DVD-RW and
DVD+RW. Use a new disc.
Reformat the disc for –RW/+RW.
There should be no scratches on the surface of the disc.
To recover previous data in your disc or memory card, turn
the power off and on.
After recovering data, the system will be switched to STBY
mode. If it fails to recover data, "Disc Error" or "Card Error"
appear.