Table of Contents
Advertisement
Top Level
Submenu
Menu Item
Item
MATL
ALU
STL
STST
IRON
CIRO
PVC
PLST
PLUR
CUSTOM
UNITS
IN
MM
MODE
P-E
PECT
E-E
E-E-E
UG20DL
LT ON
LT OFF
LT AUTO
MEMOFF
31
Aluminium: 6350 m/s (0.2500 in/µs)
Steel: 5918 m/s (0.2330 in/µs)
Stainless Steel:
Iron:
Cast Iron:
PVC:
Polystyrene:
Polyurethane:
Custom material. The common material types listed above each have
a standard factory-set sound-velocity. Materials of the same type, can
have varying grades and consistencies and as a result, the material
sound-velocity will also have slight variations.
allow you to add your own sound-velocity, and can be programmed
via NDT Link PC software
Select for measurements in inches.
Select for measurements in millimetres.
Select to measure non-coated material (bare metals).
Select to measure coated materials. Measures the thickness of both
the base material and coating.
Select to measure coated materials. Measures the base material only
without having to remove the coating.
Special multiple echo mode used only with Elcometer NDT single
element membrane transducers.
Select to switch on all the LEDs and display backlights.
Select to switch off all the LEDs and display backlights.
Select to switch on all the LEDs and display backlights when the gauge
takes a measurement.
Select to disable data logging. When selected, this submenu item
moves to the start of the top level menus.
Description
CUSTOM
is included to
Advertisement
Table of Contents
