SoundTube SM890i Installation Instructions

SM890i
Install Instructions For:
SM890i
Box contents
1 Speaker
1 Terminal weather boot
1 Mounting bracket
1 Safety cable
1 Euroblock connector
1 5 mm Allen hex key
1 Paint mask
Grille
Grille retention knob
Tap Setttings
100v 70v 25v
6 Direct Direct Direct
5 X 150 19
4 150 75 10
3 75 38 5
2 38 19 2.5
1 19 10 1.3
The SM890i has a rotatable horn for 85° or 110° coverage.
Speaker ships in the 110º vertical (85º horizontal) position. To change to
85º vertical (110º horizontal), follow these directions:
1.
To remove the grille, rotate
the grille retention knob
counter-clockwise while gently
pushing down on the grille.
Remove the grille from the
speaker by pulling gently on the
grille retention knob.
Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
2.
To release the horn, insert
hand into horn throat and twist
horn assembly counter-clockwise.
1.435.647.9555
Terminal weather boot
Clamp knob
Euro block
Rotatable horn
85º
110º
3.
To replace horn assembly,
insert horn 1/8 turn from final
position and rotate clockwise to
tighten. Horn is fully engaged
when horn baffle throat is
aligned with speaker.
© 2010 SoundTube Entertainment, Inc. All rights reserved. PN INS-SM890i Rev 06.14.10
Warning
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
| |
800.647.TUBE www.soundtube.com
Mounting bracket
Signal wire
Tap switch
110º
85º
4.
Attach grille by pressing down
gently and rotating the retention
knob clockwise to vertical postion.
Grille retention knob will snap into
the matching recess in the grille
when fully engaged.