Fluke AXTAP1204BT-BT User Manual page 37

Command Line Interface (CLI)
APPLICATION - COMMAND LINE INTERFACE (CLI) continued
SHOW (SH): Using this command alone, displays general information about the Link or Dual-Link Aggregating
Tap. It is entered and displays information as shown:
SHOW
• Date/Time
• Product
• Serial number
• Version
• Management port MAC address
• Management port IP address, IP Subnet, Default gateway, and IP port
• Groups
• Period ARP
Example:
>SH
Date/Time:
Product:
Serial Number:
Version:
MAC Address:
IP Address:
IP Subnet:
IP Default Gateway:
IP Port:
TAP 1:
1: Port 1
2: Port 2
Period ARP:
The SHOW command can be used to display more specific information with other qualifiers. See the following
SHOW-based commands for more information.
SHOW PRODUCT (SH PR): This command displays the name, serial number, and firmware version of the Link
or Dual-Link Aggregating Tap. It is entered and displays data as shown:
SHOW PRODUCT
• Product Name
• Serial Number
• Firmware Revision (x.x.x.x = boot loader. major micro. minor micro. build number )
Example:
>SH PR
Product: AXTAP-2010LX-BT
Serial Number: 9326023
Firmware Revision: x.x.x.x
THIS USER GUIDE APPLIES TO ALL MODELS WITH
A SERIAL NUMBER PRIOR TO S/N: 1883XXX
09-15-2009 13:57:23
AXTAP1204BT-BT
9326023
5.2.0.19
00-CO-17-0C-0D-0E
192.168.1.1
255.255.255.0
0.0.0.0
2370
DISABLED
Build Number
Minor Micro
Major Micro
Boot Loader
31