Transaction Number Preset - Royal 482NT Operating Manual

TRANSACTION NUMBER PRESET
. . .
.
Transaction Number Preset allows you to choose a beginning transaction number of your own. The TF'?nSG.'.ction
Number normally begins with the number 001 and counts
up
conseclI"tlVely'ufltil
a-wi!
Report
Is
taken;
thereafter
it resets back to 001. Tra:lsaction Number Preset can also be used to re-enter the last transaction number in
the event information is lost.
Extra Option: The register is programmed to have the Transaction Number reset to zero after a
T
Report is
taken.
If
desired, a procedure is offered not to have the TransactiOrl Number reset to zero after
a
"r
Report is taken, for
detaUs see
Flag
10.
Option
1,
on Pages 42-43.
TO P ROGRAM THE TRANSACTION NUMBER
·PRG
W
+
(TRANSACTION #)
+
(PLU ALl)
3 digit #
Example: To program the Transaction Number to be 100:
1. Turn
th~
key to the "PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed. TYPE the (PASSWORD #). then PRESS
the (CHECK) Key, or if you did not program a PRG/Z Manager Password, go to Step 3.
3. lYPE (100). then PRESS the (PLU ALl) Key.
40