Re-Inking The Thank You Stamp - Royal 482NT Operating Manual

RE-INKING THE THANK YOU STAMP
THANK YOU STAMP
Your cash register is equipped with a pre-Inked rubber stamp that automatically prints "YOUR RECEIPT THANK
YOU· on every customer receipt at
the
completion of a transaction. If the print becomes unclear or faint.: re­
inking the stamp wDl
be
necessary.
Follow this procedure for refilling the stamp pad:
1. Open the journal compartment cover, first be sure
that the lock
~ocated
on the left side of the journal
compartment cover) is unlocked using the Cash
Drawer/Journal
Lock
Key #515. Grip the left side of
the journal cover and gently pull back. The cover
will remain open in an upright position. .
2. The Thank You Stamp is located directly
in
tront of
the printer. It is a small black plastic rectangular
piece. Using your thumb and index finger, finnly
grasp the .stamppad on both ends
and
pull upward.
3. On the reverse side of the stamp pad is a small hole.
Feed 1 drop of ink into the hole. Be sure to use ink
that is specified for such use. otherwise a chemical
reaction may damage the stamp pad. The stamp
pad ink for this purpose can be ordered directly from
ROYAL by using the enclosed Accessories Order
Form.
4. Replace the stamp pad. Be sure that
it
snaps into
place securely.
Ink refill hole
5. After re-inking the stamp, close the journal
compartment cover and use the Cash
Drawer/Journal Lock Key#S1S to lock it.
if
desired.
12