Royal 482NT Operating Manual page 34

DEPARTMENT STATUS
(Continued)
TO PROGRAM DEPARTMENTS AS TAXABLE
"PR(>' .;
(Ai::l.MIle/Oea<:tivale) .; (St.andan:!/Gallonage Oorpl.) + (Multiple/Single Entry) + (\"101..0 #) + (Tax Sla!us #) +
r.:rr
fW fT~
1 elign
f
1 dlgn # 1 dlglt # 1
el19~
# :2 digtt #
+
II"rice')
+
(Dept.)
7 dlglt #
ImllJlimum)
• Optional: If no preset price is desired, skip entering the price.
Example: Program Department 1 to charge a single tax rate (TAX 1); HDLO of ·0· and Multiple.
Entry/Positive Price and' preset price of $1.00:
1. Turn the key to the ·PRG" (PROGRAM) position.
2. . If a PRGjZ Manager Password has been programmed, TYPE the (PASSWORD #). then PRESS
the (CHECK) Key, or if you did not program a PRGjZManager Password, go to Step 3.
3. TYPE (0)(0)(0)(0)(0)(1), PRESS the (ST fWfTAX) Key.
4. TYPE (100), then PRESS the (DEPARTMENT 1) Key. If you do not wish to preset a price, only
PRESS the (DEPARTMENT 1) Key on this Step.
Important: It is not necessary to press the decimal point when entering a price,
* Repeat Steps 3 and 4 before every Department Key you wish to charge tax.
TO PROGRAM DEPARTMENTS AS NON-TAXABLE
Although the factory default setting of all departments is non-taxable, you may need to program certain
department keys for the non-tax setting.
'PAG' .; IAt::livale/Deacti""'el
, digh
t
..
ISland"'d/GaJlonag~
Oorp!.j .;
1 dig"
t
jMuhlpl~/Slngl.
Entry)
+
(HDLO #)
+
(Tax SlalUS #)
+ (:;rfWfT~ +
IPrice') ..
1 digit # 1 digit' :2 dig" # ­ 7 digit "
lmaximum)
(Dept)
• Optional: If no preset price is desired, skip entering the price.
Example: Program Department 2 as non-taxable, HOLD of ·0", and Multiple Entry/Positive Price and
preset price of $1.00:
1.
Turn the key to the ·PRG" (PROGRAM) position.
2. If a PRG/Z Manager Password has been programmed, TYPE the (PASSWORD #), then PRESS
the (CHECK) Key, or
if
you did not program a PRGjZ Manager Password, go to Step 3.
3. TYPE (0)(0)(0)(0)(0)(0), PRESS the (STjWfTAX) Key.
4. TYPE (100), then PRESS the (DEPARTMENT 1) Key. If you do not wish to preset a price, only
PRESS the (DEPARTMENT 1) Key on this Step.
Important: It is not necessary to press the decimal point when entering a price .
..
* Repeat Steps 3 and 4 before every Department Key you wish to charge no tax.
Confirmation Report: The programming of the Departments is done in a non·print mode. To check your
results, a Program Confirmation Report is available. For details see Page 44.