Important Safety Instructions - GbeDigital GBE104 v2.2 Operating Manual

Important Safety Instructions

Warning：
To reduce the risk of fire, electric
shock or product damage, do not
expose the digital frame to rain,
moisture, dripping or splashing of
liquids. Make sure no objects filled
with liquid, such as cups or vases are
placed on or near the digital frame.
Do not use the digital frame in
conditions which
condensation to occur.
Read these operating instructions carefully before using the unit and keep these
instructions handy for future reference. Heed all warnings and cautions.
• The digital frame is for indoor use only.
• Do not use the digital frame near water or while wet.
• Do not drop, bump, jar, shake or expose the unit to severe vibration.
• Keep the unit away from direct sunlight. Face the frame away from sunlight to reduce
glare.
• Do not use the digital frame near any heat source such as radiators, heat registers,
stoves or any other devices (including amplifiers) which produce heat.
• To prevent risk of heat buildup, place the frame in a well-ventilated area. Do not block
the ventilation holes on the back of the digital frame.
• Protect the power cord from being walked on or pinched, particularly at plugs,
electrical outlets, and point where the cords exit from the digital frame.
• Avoid touching the LCD screen surface. The screen can be scratched or broken, and
fingertips may leave an oily residue.
• Use only attachments/accessories specified by the manufacturer.
• Unplug the unit during lightning storms or when used for long periods of time. It is
recommended that you turn off and unplug the unit when it is not in use.
• If any fault occurs with the digital frame, first switch the power switch off, then unplug
the power cord from the wall outlet, then disconnect the power supply from the unit.
• Refer all servicing to qualified service personnel. Servicing is required when the
digital frame has been damaged in any way. For example, if the power cord has been
damaged, liquid has been spilled on or objects have fallen into the digital frame, the
digital frame has been dropped or expose to moisture, or is not operating normally.
• To clean the LCD screen: Gently wipe the LCD screen with a soft, non-abrasive, lint-
free cloth, such as a camera lens cloth. Do not use liquids of any kind on the LCD
screen.
6
could allow
Warning：
To reduce risk of electric shock, do
not open the digital frame case and
do not remove screws from the frame
case. There are no user serviceable
parts inside the case.
Disassembly of the digital frame
will void your warranty.