Audio Out / Video Out - Mode; Additional Instructions; How To Create A Folder In The Internal Memory - GbeDigital GBE104 v2.2 Operating Manual

10.4 inch digital photo frame
Table of Contents

Advertisement

AUDIO OUT / VIDEO OUT - Mode

You can connect your digital frame to an external device (i.e., TV) to display your
media from your digital photo frame.
1. With the digital frame switched off, use the AV cables included with your device. Plug
the cables into the A/V OUT jacks located on the bottom edge of the digital frame.
(Please review Figure 5 on page 8.)
NOTE: Use only the cables supplied with your digital photo frame. Be sure to use the
correct cables for each source. The cables are color coded for your convenience.
Refer to your external device's operating manual to identify the appropriate connection
source of your external device.
2. Make sure your input device is set to the appropriate setting (i.e., AV channel). Switch
the digital photo frame ON. Lastly, press the ZOOM button on your remote control.
(While you connect your digital photo frame into TV your digital frame screen will be
blank.) Refer to Setting up your digital photo frame on page 9.
3. While in AUDIO OUT / VIDEO OUT mode, all operations will function as normal. Use
your digital photo frame's remote to play the media of your choice.

ADDITIONAL INSTRUCTIONS

HOW TO CREATE A FOLDER IN THE INTERNAL MEMORY

IMPORTANT NOTE: PC Required
1. Find the USB cable and note that it has two different USB connection types. One
side is labeled PC USB, and the other is labeled Mini-USB.
2. While the digital frame power is turned ON, plug the Mini-USB cables onto the
digital photo frame's slave slot. NOTE: It is labeled as SLAVE on the digital photo
frame.
3. Now plug the USB cable onto your computer's USB port. Please review the
diagram below for further clarification
PC USB Port
4. Your computer will automatically recognize the Digital Photo frame and create a
drive letter for it. The name will appear as,"Removable Disk (X :)", where "X" is the
letter drive assigned by your computer.
5. You can also choose My Computer then double click on" (Removable Disk (X :)",
where "X" is the letter drive assigned by your computer.
18
PC USB
USB Cable
Mini-USB
SLAVE port

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents