Table of Contents
Advertisement
Getting Started
Setting up your digital photo frame
1. Remove the contents from the box.
2. Review the Safety Instructions on page 5.
3. Remove the protective plastic sheeting from the LCD screen.
4. Install the Back Stand by placing it on the aperture and turning it clockwise. View
diagram below for more information.
5. Remove the protective film between the remote's battery and the battery terminal.
6. Plug the AC adaptor into an electrical outlet and connect the power cord to the digital
photo frame.
7. Before switching the digital photo frame ON, insert your media card into the
appropriate slot.
8. Turn the power switch to the "on" position.
9. Your digital photo frame will automatically take you to the main Menu.
10. By default, PHOTO will be selected on the main menu. To view your digital pictures,
press the PHOTO button on your remote control. Choose your memory card using
LEFT
or RIGHT
screen and press ENTER. On the next screen you will see source of your memory
card and press ENTER to see them.
11. Your pictures will automatically start playing in slideshow mode.
12. To play music while viewing your digital pictures, press the COMBO button on your
remote.
NOTE: Your memory card must contain compatible music files in the same
folder with your pictures. Please review the file types supported by your digital
photo frame on page 6.
Inserting and Removing Media Cards
When inserting or removing media cards, keep the following in mind:
•
Warning
the unit is turned off when inserting or removing the memory card.
• The digital photo frame supports the Compact Flash™ (CF), xD-Picture Card™ (xD),
Multi Media™ (MMC), SD™ card (SD), Memory Stick™ (MS) and Memory Stick Pro™
(MS-Pro). Do not attempt to insert any other card or media into the digital
frame's card slot.
10
arrow button until your memory card option is selected on your
：
To prevent damage to the unit or memory card, please make sure that
Hide quick links:
Advertisement
Table of Contents
