Host Mode - (Using Your Digital Photo Frame With An External Usb Card Reader); Slave Mode; S Internal Memory ) - GbeDigital GBE104 v2.2 Operating Manual

NOTE: Depending on the image size and resolution, it may take up to 12 seconds
for each thumbnail to appear. For optimal performance, use the recommended
resolution of 800 x 600 pixels.
HOST Mode –
(Using your digital photo frame with an external USB card reader)
1. With the digital frame switched on, connect your external USB card reader to the
port labeled HOST. (Refer to figure 3 on page 7.)
2. Switch your digital photo frame's power ON.
3. Your digital photo frame will automatically detect your external drive and assign an
available drive.
4. You may use the photo frame as normal. To view the media stored in the HOST
drive, make sure you select the appropriate section when while using the PHOTO,
MOVIE, COMBO, and TEXT or EDIT functions.
SLAVE Mode – (
Adding media files to the digital photo frame's internal memory)
1. Find the USB cable and note that it has two different USB connection types. One
side is labeled PC USB, and the other is labeled Mini-USB.
2. While the digital frame power is turned ON, plug the Mini-USB cable onto the
digital photo frame's slave slot. NOTE: It is labeled as SLAVE on the digital photo
frame.
3. Now plug the USB cable onto your computer's USB port. Please review the
diagram below for further clarification.
PC USB Port
4. Your computer will automatically recognize the Digital Photo frame and create
several drive letters for it. The names will appear as:" Removable Disk (X :)"and"
Removable Disk (Y :)", where "X and Y" are the letters drive assigned by your
computer. Your digital frame will show "Connecting PC..."
5. Locate the drive that contains your pictures.
6. To add files, you can drag the desired files from your computer onto the Photo
Frame removable drive folder. Refer to your computer's user manual for moving
and copying files in your computer.
7. To safely remove the cable from your digital photo frame, make sure the power is
turned off.
8. Wait until Disconnected with PC; please restart appears on your digital frame.
9. Restart your digital frames to update the files.
NOTE: While the digital photo frame is connected to your computer, no other
functions are accessible.
PC USB
USB Cable
Mini-USB
SLAVE port
17