Making Connections - Radial Engineering AC DRIVER Manual

MAKInG connEcTIonS

Before connecting the AC-Driver, ensure that you've turned down the volume or muted any channels
on the mixer, powered speakers or guitar amps that you'll be connecting to. This will prevent any plug-
in transients from damaging components or causing loud pops or clicks in your system.
As the AC-Driver has no power switch, the moment you connect a 9V power supply the POWER
LED will illuminate, letting you know that the pedal is ready to use. The AC-Driver uses a typical 9V
Boss®-style power supply (not included), and requires a minimum of 40mA of current with a center-
pin negative connector.
5
Radial Engineering Ltd. AC-Driver™ User Guide