Making Connections - Radial Engineering HEADLIGHT Manual

mAKING cONNEcTIONS

Before making connections, ensure your amp is turned off or volume level turned down. This will
eliminate connection transients from damaging more sensitive components. There is no power switch
on the Headlight. As soon as you connect a 9V power supply, it will come to life. The Headlight em-
ploys a typical 9V Boss ® -style power supply (not included). Once the power connection is made, the
output-1 LED will illuminate. The Headlight is equipped with a power supply cable lock to prevent
accidental disconnection. To use, simply unscrew using a hex key, insert the power cable through the
clamp and re-tighten.
4
Radial Engineering Ltd. Headlight™ User Guide