Replacing Fuse - Grizzly G0844 Owner's Manual

Replacing Fuse

This machine features an on-board fuse designed
to protect sensitive electrical parts from thermal
damage in the event of an overload. If the spindle
does not start, replace the fuse.
Replacement Fuse: P0844084-1
Tool Needed
Flat Head Screwdriver ....................................... 1
To replace fuse:
1.
DISCONNECT MACHINE FROM POWER!
2. Rotate end of fuse holder (see Figure 48) on
electrical box counterclockwise, then remove
fuse.
Model G0844 (Mfd. Since 2/18)
Qty
Fuse
Figure 48. Location of fuse holder and fuse.
3.
Insert new fuse.
4.
Re-install fuse holder.
Fuse
Holder
-37-