Using The Lithium Ion Battery Pack; Utilisation De La Pile Au Lithium - Samsung DC173(U) Owner's Instruction Book

Samsung dvd camcorder owner's instruction book
Table of Contents

Advertisement

ENGLISH
Preparation

Using the Lithium Ion Battery Pack

 Use SB-LSM80 or SB-LSM160 (not supplied) Battery Pack only.
 The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the [Power] switch to [OFF].
2. Attach the Battery Pack to the DVD
Camcorder.
3. Connect the AC Power adapter(AA-E9
TYPE) to a wall socket.
4. Open the DC IN Jack Cover.
5. Connect the DC cable to the DC IN
jack on the DVD Camcorder.
 The charging indicator will start to
blink, showing that the Battery is
charging.
6. When the Battery is fully charged,
disconnect the Battery Pack and the
AC Power Adapter from the DVD
Camcorder. Even with the Power
switched off, the Battery Pack will still
discharge.
Blinking time
Once per second
Less than 50%
Twice per second
50% ~ 75%
Three times per second
75% ~ 90%
Blinking stops and stays on
90% ~ 100%
On for a second and off for a
Error - Reset the Battery
second
Pack and the DC Cable
Charging rate
<Charging indicator>
Préparatifs

Utilisation de la pile au lithium

 N'utilisez que le modèle de bloc-piles SB-LSM80 ou SB-LSM160 (non fournie).
 Il est possible que le bloc-piles soit légèrement chargé au moment de l'achat.
Chargement du bloc-piles lithium-ion
1. Placez l'interrupteur [Power] sur [OFF].
2. Insérez le bloc-piles dans le DVD
3. Branchez l'adaptateur CA (TYPE
4. Ouvrez le couvercle de la prise DC IN.
5. Branchez le câble CC sur la prise
6. Une fois qu'il est complètement chargé,
Power Switch
Fréquence de
clignotement
Une fois par seconde
Deux fois par seconde
Trois fois par seconde
Le clignotement cesse et le
témoin reste allumé
Le témoin clignote lentement,
il s'allume une seconde et s'
éteint une seconde
FRANÇAIS
caméscope.
AA-E9) dans une prise murale.
entrée CC du caméscope.
 Le témoin de charge se met à
clignoter, indiquant ainsi que le
bloc-piles est en cours de charge.
débranchez le bloc-piles ainsi que l'
adaptateur CA, de l'appareil. Le bloc-
piles se décharge même lorsque l'
appareil est éteint.
Taux de charge
Inférieur à 50%
50% ~ 75%
75% ~ 90%
90% ~ 100%
Erreur – Replacez le bloc-
piles et le cordon CC
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents