ENGLISH
Initial Setting : Display Menu Setting
Displaying the Date/Time (Date/Time)
The Date/Time function works in Camera Mode/Player Mode/M.Cam
Mode/M.Player Mode. page 26
The date and time are automatically recorded on a special data area of
the disc.
1. Set the [Mode] switch to [DISC] or [CARD].
(SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [
[
(Player)].
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Joystick] up or down to select
<Display>, then press the [Joystick].
5. Move the [Joystick] up or down to select
<Date/Time>, then press the [Joystick].
6. Move the [Joystick] up or down to select the
Date/Time display type, then press the [Joystick].
Date/Time display type: <Off>, <Date>, <Time>,
<Date&Time>.
7. To exit, press the [MENU] button.
Notes
The Date/Time will read 12:00 AM JAN.01.2007 in the following
conditions.
- During playback of a blank section of a disc.
- If the disc was recorded before setting the Clock function in the
DVD Camcorder.
- When the Lithium Battery becomes weak or dead.
Before you use the Date/Time function, you must set the clock.
page 30
4
(Camera)] or
6
Réglage initial : réglage du menu Display (Affichage)
Affichage de la date et de l'heure (Date/Time)
La fonction Date/Time est utilisable en Camera Mode/Player Mode/
M.Cam Mode/M.Player Mode. page 26
La date et l'heure sont enregistrées automatiquement dans une zone du
disque réservée à ce type de données.
1. Placez l'interrupteur [Mode] sur [DISC] ou [CARD].
Camera Mode
►Display
2. Placez l'interrupteur [Power] sur [
LCD Bright
LCD Color
3. Appuyez sur la touche [MENU].
Date/Time
►Off
TV Display
►On
4. Déplacez le [Joystick] vers le haut ou vers le bas
Move
OK
Select
MENU
Exit
5. Déplacez le [Joystick] vers le haut ou vers le bas
Camera Mode
►Display
LCD Bright
6. Déplacez le [Joystick] vers le haut ou vers le bas
LCD Color
Date/Time
Off
TV Display
Date
Time
Date&Time
7. Pour quitter, appuyez sur la touche [MENU].
Move
OK
Select
MENU
Exit
Remarques
Les informations Date/Heure s'affichent sous la forme
12:00 AM JAN.01.2007 dans les conditions suivantes:
- lorsqu'une partie vierge d'un disque est lue.
- Si la cassette a été enregistrée avant le réglage de la fonction
Clock du caméscope DVD.
- lorsque le bloc-piles au lithium est faible ou déchargée.
Vous devez régler l'horloge avant d'utiliser la fonction Date/Time.
page 30
FRANÇAIS
(SC-DC173(U)/DC175/DC575 uniquement)
[
(Player)].
La liste des menus apparaît.
pour sélectionner <Display>, puis appuyez sur
[Joystick].
pour sélectionner <Date/Time> puis appuyez sur
[Joystick].
pour sélectionner le type d'affichage de Date/Heure,
puis appuyez sur [Joystick].
Type d'affichage de la date et de l'heure : <Off>,
<Date>, <Time>, <Date&Time>.
(Camera)] ou
37