Lithium Battery Installation; Insertion De La Pile Au Lithium - Samsung DC173(U) Owner's Instruction Book

Samsung dvd camcorder owner's instruction book
Table of Contents

Advertisement

ENGLISH
Preparation

Lithium Battery Installation

Lithium Battery Installation for the Internal Clock
1. Remove the Battery Pack from the rear
of the DVD Camcorder.
2. Open the Lithium Battery Cover on the
rear of the DVD Camcorder.
3. Position the Lithium Battery in the Lithium
Battery Holder, with the positive (+)
terminal face up.
Be careful not to reverse the polarity of
the Battery.
4. Close the Lithium Battery Cover.
Installing the Lithium Battery in the Remote Control
(SC-DC175/DC575 only)
1. Turn the battery holder counterclockwise
(as indicated with [ ] mark), using your
fingernail or a coin to open it. The battery
holder opens.
2. Insert the battery while the positive (+)
terminal faces down and press it firmly
until you hear locking sound.
3. Place the battery holder to match its [ ] mark
with the [
] mark on the remote control,
and turn the battery holder clockwise to
fix it.
Precautions regarding the Lithium Battery
1. The Lithium Battery maintains the clock function and preset contents of
the memory; even if the Battery Pack or AC Power adapter is removed.
2. The Lithium Battery for the DVD Camcorder lasts about 6 months under
normal operation from time of installation.
3. When the Lithium Battery becomes weak or dead, the date/time
indicator will display 12:00 AM JAN.01.2007 when you set the Date/
Time to On. When this occurs, replace the Lithium Battery with a new
one (type CR2025).
4. There is a danger of explosion if Lithium Battery is incorrectly replaced.
Replace only with the same or equivalent type.
Warning: Keep the Lithium Battery out of reach of children. Should a
battery be swallowed, consult a doctor immediately.
20
Préparatifs

Insertion de la pile au lithium

Insertion de la pile au lithium de l'horloge interne
Insertion des piles dans la télécommande
(modèles SC-DC175/DC575 uniquement)
1
2
Battery
Holder
Précautions d'utilisation de la pile au lithium
1. La pile au lithium assure le fonctionnement de l'horloge et permet la conservation
en mémoire des réglages même lorsque le bloc-piles ou l'adaptateur CA est retiré.
2. Dans des conditions d'utilisation normales, la durée de vie de la pile au
lithium est d'environ six mois à compter de son insertion.
3. Lorsque la pile au lithium devient faible ou est complètement déchargée, le
témoin d'horodatage affiche 12:00 AM JAN.01.2007 quand vous réglez la
fonction Date/Time sur On. Dans ce cas, remplacez la pile au lithium par une pile
neuve (type CR2025).
4. Il existe un risque d'explosion si la pile au lithium est replacée de façon incorrecte.
Veillez à remplacer la pile usagée par une pile neuve identique ou du même type.
Avertissement: conservez la pile au lithium hors de portée des enfants.
En cas d'ingestion de la pile, consultez un médecin immédiatement.
1. Retirez le bloc-piles du compartiment
situé à l'arrière du DVD caméscope.
2. Enlevez le couvercle de la pile au lithium
situé à l'arrière du DVD caméscope.
3. Placez la pile au lithium dans son
compartiment, pôle positif (+) orienté vers le
haut. Veillez à ne pas inverser les polarités.
4. Refermez le compartiment de la pile au
lithium.
1. Pivotez le support de la pile en sens
antihoraire (indiqué par le symbole [ ]),
utilisation de votre ongle ou d'une pièce de
3
monnaie pour l'ouvrir. Le compartiment de la
batterie s'ouvre.
2. Insérez la pile, le pôle positif (+) orienté vers
le bas, puis appuyez dessus jusqu'à entendre
un clic.
3. Placez le couvercle de la pile de sorte que
le symbole [ ] corresponde au symbole
[
] de la télécommande, puis pivotez le
couvercle dans le sens horaire pour le fixer.
FRANÇAIS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents