Date/Time - Samsung D327(i) Owner's Instruction Book

Advanced Recording
G

DATE/TIME

✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
✤ The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
I
The menu list will appear.
2. Move the MENU SELECTOR to highlight VIEWER and push the MENU SELECTOR.
3. Move the MENU SELECTOR to highlight DATE/TIME.
4. Push the MENU SELECTOR to select the sub-menu.
5. Using the MENU SELECTOR, select the DATE/TIME mode.
I
You can choose to display - OFF, DATE, TIME, DATE/TIME
- OFF
- DATE only
- TIME only
- DATE & TIME
I
To return to the previous menu, highlight the DATE/TIME in the middle of OSD
and push the MENU SELECTOR.
6. To exit, press the MENU button.
Notes
I
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) button.
I
The DATE/TIME will read "- - -" in the following conditions:
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera's memory.
- When the lithium battery becomes weak or dead.
I
Before you use the DATE/TIME function, you must set the Clock. See CLOCK SET on page 39.
ENGLISH
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME
55 55