Advanced Recording
• DATE/TIME
+ The DATE/TIME function works in both CAMERA and PLAYER mode.
+ The date and time is automatically recorded on a special data area of the tape.
+ You can choose what you want to display - either the date, the time or both.
•
DATE only
• TIME only
•
DATE/TIME
I ENGLISH_
1. Press the MENU ON/OFF button.
• The menu list will appear.
2. Turn the MENU DIALto DATE/TIME.
3. Press ENTER to enter the sub-menu.
4. Using the MENU DIAL, select the DATE/TIME mode.
•
Press ENTER to confirm the DATE/TIME mode and return to the main menu.
•
If you exit the sub-menu without pressing ENTER, the DATEmME mode is not changed.
5. To exit, press the MENU ON/OFF button.
/MENU /
SP STaY
/
• DATE[lIME
•
REC LAMP
......
OFF
WND C T ........
OFF
;_;
AUDIO MODE
12 BIT
DATE
PHOTO MODE
F_ELD
TIME
D_SPLAY ............
LCD
DATFJTIME
SEL ENTER
MENU
_
MENU
SP STBY
• The DATE/TIME is not affected by the OSD ON/OFF (ENTER) button.
• The DATE/TIME will read "---"
in the following conditions.
-
During playback of a blank section of tape.
-
If the tape was recorded before setting the DATE/TIME in the camera's memory.
- When the Lithium Battery becomes weak or dead.