To Boot Up Camera With Angle Of View Fixed When I Turn On Its Power? - Panasonic AW-HE40 Installation & Setup Manual

How can I boot up the camera with its angle of view fixed when I turn on its power?
Isn't it possible to set the camera's [HOME POSITION]?
★ To boot up the camera with its view angle fixed, please use [POWER ON Preset
Function (*2)].
(*2) A function to memorize the angle of view immediately before the power status switches
over to Standby mode
★ [HOME POSITION] is for moving to the forward-facing position. It is impossible to change
this position.
① Set the camera's angle of view.
② Change the camera's power status to Standby mode.
※ For the procedure for changing the power status mode, please see "3. Turning AW-HE40 Camera
ON" of this Guide.
③ Turn the power on again.
Setting up is now completed.
If you fail to bring the camera into Standby mode and disconnect the power supply at the AC power
feeding side, the view angle will not be memorized.
Accordingly, after having been set up, the camera will always boot up with its fixed view angle by
powering it ON/OFF at the AC power feeding side.
・ For details, please see the illustrated manual
Specified Position".
"AW-HE40 – Booting Up with Pan-Tilt Head in