Panasonic AW-HE40 Installation & Setup Manual page 4

(Figure 3： AW-RP50 Control Panel)
（A）
MENU ON ⇒ Select [10]
[1]CAMERA CTL
Turn F1
[5]AUTO SET IP
Press F1
1．AUTO SET
(*1) The cameras (C) and switchers (S) that AW-RP50 manages are displayed as follows.
C:003/003
①
① ②
After setting up, LED buttons 1 – 3 at <CAMERA STATUS / SELECTION> on the AW-RP50 operation
panel light up according to the camera's power status. If a camera is in STANDBY mode (turned off:
factory default), it lights up in orange. If in POWER ON mode (turned on), it lights up in green.
・
For details, please see the illustrated manual
AW-RP50 Controller".
Press F2
RENEW IP ADR
S:1/1
② ③ ④
③ ④
（C）
（D）
（B）
C:003/003
Turn F2
C:003/003
Press F2
C:003/003
① Newly detected cameras
② Currently managed cameras + ①
③ Newly detected switchers
④ Currently managed switchers + ③
"Controlling Multiple AW-HE40 Cameras via
S:1/1
NO↓
S:1/1
YES↓
S:1/1
COMPLETE