My Camera Is Installed On Ceiling. How Can I Turn Image Upside Down? - Panasonic AW-HE40 Installation & Setup Manual

● This section provides noteworthy operating or setting procedures
selected from frequently asked questions to us.
My camera is installed on the ceiling. How can I turn the image upside down?
★ Turning upside down the output image from the camera assigned to [CAM1]
① Press the Button 1 at <CAMERA STATUS/SELECTION>. – (Fig. 5-A)
Hold down CAMERA OSD button – (Fig. 5-B) for 2 seconds. The button will light up. (To put it out,
hold it down again for 2 seconds.) And the on-screen menu (Fig. 6) will be opened on the SDI (or
HDMI) output image.
② Use F1 dial – (Fig. 5-C) to change the camera menu setting below.
Procedure: System ＞ Others ＞ Others 1/4 ＞ Install Position ⇒ Select [Hanging].
(Figure 5: AW-RP50 Control Panel)
（A）
Turn F1 → Select "System" →
Press F1
・ For details, please see the illustrated manual
(Figure 6: AW-HE40 On-Screen Menu)
Turn F1 → Select "Others" →
Press F1
"AW-HE40 – Turning Image Upside
（C）
（B）
・Press F1 → [Desktop] blinks.
・Turn F1 → Select [Hanging].
・Press F1 → Setting determined
Desktop ： Stand-alone Installation
Hanging ： Suspended Installation
Down".