3.3.2 Mounting Interface Boards to Slots
The interface boards are mounted to Slot 1 and Slot 2 of the cabinet. The available slot
positions '3.1 Cabinet Configuration'.
Category
Voice C.O. line
Voice extension
Data voice
application
References
For the detailed features and functions for each interface board, refer to 'OfficeServ
7200 System manual'.
The Procedure for mounting the interface board to each slot is as follows:
1) Check the exterior of the interface board for any damages.
2) Align each Interface board to the guardrail of the universal slot of the OfficeServ 7100
basic cabinet or expansion cabinet, and slide the Interface board into the slot.
© SAMSUNG Electronics Co., Ltd.
Table 3.7 Interface Board Types and Available Slots
Interface Board
TEPRI, TEPRI2
8TRK, UNI
16DLI2, 8DLI, 16SLI2, 8SLI, 8Combo, UNI
MGI, MGI64
LIM
Figure 3.11 Mounting an Interface Board on a Slot
OfficeServ 7100 Installation Manual
Slots Available
Slot 1 and Slot 2 of the cabinet
Slot 1 and Slot 2 of the cabinet
Slot 1 and Slot 2 of the cabinet
Slot 1 and Slot 2 of the cabinet
Slot 1 and Slot 2 of the cabinet
3-11