The Back Panel - TP-Link Archer C2600 User Manual

Chapter 1
LED Explanation
Name
(Wireless 5GHz)
(Internet)
(LAN)
(WPS)
(USB)
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes
and then turn off.
1. 2. 2.

The Back Panel

The router's back panel shows the connection ports, buttons and antennas (view from
left to right). Refer to the following for detailed instructions.
Status
On The wireless 5GHz band is working normally.
Off The wireless 5GHz band is disabled.
White The router is connected to the Internet.
Orange The WAN port is connected, but there is no Internet connection.
Off The WAN port is not connected.
On At least one LAN port is connected.
Off No LAN port is connected.
A wireless device has been successfully added to the network by
On
WPS (Wi-Fi Protected Setup) function.
WPS is in progress. This will take about 2 minutes. Please press the
Flashing WPS button on other wireless devices that you want to add to the
network while the LED is flashing.
Off
WPS is not working.
On The USB device is ready to use.
Flashing The USB device is being identified.
No USB device is plugged into the USB port or the USB device is not
Off
identified or the USB device has been safely ejected.
Get to Know About Your Router
Indication
4