Specify Wireless Settings - TP-Link Archer C2600 User Manual

Chapter 12
Done!

12. 6. Specify Wireless Settings

The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
¾ To enable or disable the wireless function:
1. Go to Basic > Wireless.
2. The wireless radio is enabled by default. If you want to disable the wireless function of
the router, just clear the
settings will be invalid.
¾ To change the wireless network name (SSID) and wireless password:
1. Go to Basic > Wireless.
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note:
If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective.
Please write down the new SSID and password for future use.
Interface: Determined by the port (WAN/LAN) that sends out
data packets. In the example, the data is sent to the gateway
through the LAN port of Router A, so
Description: Enter a description for this static routing entry.
5. Click OK.
6. Check the System Routing Table
entry you've set, the static routing is set successfully.
Open a web browser on your PC. Enter the company server's IP
address to visit the company network.
Enable Wireless Radio
Network Name (SSID)
Customize Your Network Settings
LAN should be selected.
below. If you can find the
checkbox. In this case, all the wireless
and customize the password for the
75