TP-Link Archer C2600 User Manual page 32

Chapter 6
Tips:
The router can share 32 volumes at most. You can click
not need to share.
¾ To Set up Authentication for Data Security
If you enable Authentication, network clients will be required to enter the username
and password you set when accessing the USB disk.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced >
section.
3. Choose Use Default Account
Note:
For Windows users, do not set the sharing username the same as the Windows username. Otherwise, Windows
credential mechanism may cause the following problems:
• If the sharing password is also the same as the Windows password, authentication will not work since the
Windows will automatically use its account information for USB access.
• If the sharing password is different from the Windows password, the Windows will be unable to remember
your credentials and you will always be required to enter the sharing password for USB access.
4. Enable Authentication
• If you has enabled
folders.
USB Settings > Sharing
(admin) or Use New Account
to apply the account you just set.
Share All , click the button to enable
on the page to detach the corresponding volume you do
Access. Focus on the
and click Save.
USB Application
Sharing Account
Authentication for all
28