Specify Dhcp Server Settings - TP-Link Archer C2600 User Manual

Chapter 12
Done!

12. 3. Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your
router now. You can connect your set-top box to any of
the router's Ethernet port.
If IGMP is not the technology your ISP adopts to provide
IPTV service:
1 ) Tick Enable IPTV.
2 ) Select the appropriate
• Select Bridge
parameters are required, and then skip to Step 4.
• Select Custom
necessary parameters.
3 ) After you have selected a mode, the necessary
parameters, including the LAN port for IPTV connection,
are predetermined. If not, select the LAN type to
determine which port is used to support IPTV service.
4 ) Click Save.
5 ) Connect the set-top box to the corresponding LAN port
which is predetermined or you have specified in Step 3.
Your IPTV setup is done now! You may need to configure your
set-top box before enjoying your TV.
Tips
Qos and IPTV cannot be enabled at the same time.
Customize Your Network Settings
Mode according to your ISP.
if your ISP is not listed and no other
if your ISP is not listed but provides
70