TP-Link Archer C2600 User Manual page 20

Chapter 4
5. Click Save to make the settings take effect. To check your Internet connection, click
Network Map on the left of the page.
Note:
It may take 1-2 minutes to make the settings valid.
6. After the connection succeed, the screen will display as follows. Here we take PPPoE
as an example.
Tips:
1. If your Internet connection type is
2. If you use Dynamic IP and
page, please go to Advanced > Network > Internet
Bigpond Cable, please go to
PPPoE and you are provided with any other parameters that are not required on the
to complete the configuration.
Set Up Internet Connection
Advanced > Network > Internet.
16