0-Chapter 5(GODREJ)
9/20/98 5:11 PM
5
T
A
HE
NSWERING
Call Transfer
You can set your machine to transfer an incoming calls to a specified location. When you
use the call transfer feature, the machine operates as follows:
¥ When a call comes in and the caller leaves a message, your machine automatically
¥ When someone (maybe you) answers the call, your machine sends out beeps, for up to
¥ If a correct password is entered while your machine sends out beeps, the machine
¥ When the playback is complete, you hear a short beep. You can then enter another
If there is no key input or the wrong password is entered while the machine sends out
beeps, the machine releases the line.
Turning On or Off the Call Transfer Feature
1
Press Menu.
2
Press digit Ò3Ó or ¹ or
repeatedly until Ô3.SYSTEM
DATAÕ is displayed.
3
Press Start/Copy.
The display asks if you
want to set a FAX or TAD
option.
5.4
C
F
T
HAPTER
IVE :
HE
Page 5
M
ACHINE
dials the telephone number you have specified as a Call Transfer destination.
55 seconds, and waits for the remote password to be entered. The remote password is
preset to #139# at the factory.
plays the newly recorded message.
remote command to perform another operation, if you choose. See ÔUsing remote
commandsÕ on page 5.7.
Rcv.
Mode
Redial/
Pause
2
3
4
>FAX
A
M
NSWERING
ACHINE
Start/
Copy
à The blinking > means the option is
being selected.
:TAD