Table of Contents
Advertisement
0-Chapter 4(GODREJ)
9/20/98 5:14 PM
4
T
HE
Setting Document Resolution and Contrast
We recommend sending documents printed using a typewriter, felt tip pen, black ink, or
laserwriter. The paper should be white or very light, and of normal weight-not
cardboard. Blue lines on a ruled pad donÕt fax well.
When you send normal documents, you need not adjust the resolution and the contrast.
If you send documents with unusual contrast characteristics, including photographs, you
can adjust the resolution and contrast to send a high-quality transmission of the
documents.
¥ After the document has been loaded, the display prompts you to choose contrast
¥ After the document has been loaded, press
NOTE:
4.2
C
F
T
HAPTER
OUR :
HE
Page 3
F
M
AX
ACHINE
between LIGHT, AUTO, DARK. Press
document. By pressing ¹ or
AUTO, or DARK.
LIGHT works with very dark print.
AUTO works well for normal handwritten, typed, or printed documents.
DARK works with light print or faint pencil markings.
Resolution
clarity. By pressing
FINE or PHOTO mode.
STANDARD works well for printed or typewritten originals with normal-sized
characters.
FINE is good for documents containing a lot of detail.
SUPER FINE works well for documents containing extremely fine detail
SUPER FINE Works only if the remote machine also has the SUPER FINE
feature.
PHOTO is used when faxing photographs or other documents containing color
or gray shades. When PHOTO is chosen, the FINE setting is automatically
chosen.
¥ SUPER FINE mode is not used when sending documents scanned into memory (i.e. Memory
transmission)
¥ When copying is executed, resolution is automatically set to FINE.
F
M
AX
ACHINE
¹ or
to adjust the darkness of your faxed
repeatedly, the blinking cursor moves to LIGHT,
Resolution
to increase the sharpness and
repeatedly, you can choose STANDARD, FINE, SUPER
Advertisement
Table of Contents
