Table of Contents
Advertisement
0-Chapter 2(GODREJ)
9/20/98 5:06 PM
I
NSTALLATION AND
Backup Battery
The battery maintains the setup configuration and messages when a power failure occurs or when
power is accidentally disconnected.
We recommend you use an alkaline battery because it lasts longer than a conventional battery.
The battery can maintain the internal memory for about 20 hours. If the backup battery is weak or
missing, the LCD displays a warning message.
1. Lift the control panel
cartridge compartment cover
2. Remove the old battery, if necessary.
Connect the new battery to the clips.
3. Insert the battery into the battery slot.
4. Close the cartridge compartment
cover, and close the control panel.
Page 6
S
ETUP
(SF3000T only)
, and open the
.
C
T
I
S
HAPTER
WO :
NSTALLATION AND
ETUP
2.5
Advertisement
Table of Contents
