KERN FOB 1K1M Operating Instructions Manual page 14

Overview of the possible software settings:
(there may be small differences referring to the model):
Press TARE 3sec
SET
Overload setting by
hardware option
A_OFF CAP CAP
1.0
2.0 2.0
5.0 6.0
10.0 15.0
120 180 240
If the TRAD setting is OFF, this must be set to ON before a verification.
Reset into verifiable setting:
Press the key and keep it pressed until „A_OFF" appears on the display.
Press key repeatedly until „TRAD" appears.
Now press key, in the display appears "OFF".
Now press the key, „ON" appears.
Then press subsequently
The balance is now ready for verification.
In order to check the settings, repeat the process.
14
divS GrAv trAn
md-1
On Off
1g 0.5g 0.2g
2g 1g 0.5g
1g
5g 2g
0.01 0.005 0.002
1.5
3.0 3.0
300 Off
, , .
Navigation Menu
NET
0
GROSS
trAtE trAd
On Off
2400 4800 9600
md-2
FOB-BA-e-1619
End
19200