Phytec phyBOARD-Wega AM335x Quick Start Manual

phyBOARD -Wega AM335x
®
Get your phyBOARD -Wega powered up and connected in just a few simple steps.
®

1) Preparing the Hardware

1. Check the kit content (see overview on the right hand side).
2. Have your connection cables at hand: You need an RS-232 cable (one-to-one) and a standard
Ethernet cable. Phytec offers an accessory kit which includes these cables.
3. Power up the phyBOARD-Wega. For the 24 V-kit version (A):
connector (included) to a 12 V-24 V ( ± 10%) DC power supply.
Connect the 2-pin PHOENIX connector (included) to a 5 V ( ± 5%)
For the 5 V-kit version (B):
DC power supply. In both cases please note the polarity of the connectors (see picture A/B)!
If you have bought the optional power supply with your kit, it comes already with the 2-pin connector wired.
4. Turn your power supply on and plug the 2-pin PHOENIX connector into the green jack of your kit.
The Power LED D58 will light up.
Please note: only the 24V-kit version
comes with the power adapter board.
Germany France
PHYTEC Messtechnik GmbH PHYTEC France SARL
Robert-Koch-Straße 39 17, place Saint-Etienne
D-55129 Mainz F-72140 Sillé-le-Guillaume
Phone: +49 6131 9221-32 Phone: +33 2 43 29 22 33
Fax: +49 6131 9221-33 Fax: +33 2 43 29 22 34
www.phytec.de www.phytec.fr
www.phytec.eu
USA India
PHYTEC America LLC PHYTEC Embedded Pvt. Ltd.
203 Parfitt Way SW #16/9C, 3rd Main, 3rd Floor,
Bainbridge Island, WA 98110 8th Block, Opp. Police Station
Phone: +1 206 780-9047 Koramangala, Bangalore-560095
Fax: +1 206 780-9135 Phone: +91-80-40867046/48
www.phytec.com www.phytec.in
Connect the 2-pin PHOENIX
12V-24V-kit version
5V-kit version
+
A B
GND
+
GND
•
•
• •
• •
••••
••••
•• ••••••
•• ••••••
•••• •••••••
•••• •••••••
• •••• ••••••••••
• •••• ••••••••••
•• •• •
•
•
• •
••••
•• ••••••
•••• •••••••
• •••• ••••••••••
••
•
• •
• • • •
•••• ••••
•• •• •••••• ••••••
•••• •••• ••••••• •••••••
China
• • •••• •••••••••• •••• ••••••••••
PHYTEC Information Technology Co. Ltd.
•• ••
Suite 2611, Floor 26, Anlian Plaza,
• •
4018 Jin Tian Road, Futian District,
Shenzhen, CHINA 518026
Phone: +86-755-3395-5875
www.phytec.cn
Kit Contents
phyBOARD ® -Wega AM335x 2-pin
PHOENIX
RS-232 and
CAN Adapter
Additional Equipment required
Power Adapter 5 V or 24 V RS-232 Cable
Quick
Start
Guide
Optional Accessories
Evaluation Module Power Module 12 V-24 V
(PEB-EVAL-01) (PEB-POW-01)
HDMI Adapter
(PEB-AV-01)
Ethernet Cable Virtual Machine Hard Disk Image available from
www.phytec.de or on
an optionally purchasable USB Flash Drive