Clearing Paper Jams - Samsung SCX-6545N Series User Manual

5. Close the white document background and the scanner lid. Then load
the removed pages back into the DADF.

CLEARING PAPER JAMS

When a paper jam occurs, the warming message appears on the display
screen. Refer to the table below to locate and clear the paper jam.
MESSAGE LOCATION OF JAM
In the paper feed area
Paper Jam in tray 1,
(tray 1, optional tray, or
Paper Jam in tray 2,
multi-purpose tray)
Paper Jam in tray 2
(HCF),
Paper Jam in tray 3,
Paper Jam in tray 3
(HCF),
Paper Jam in tray 4,
Paper Jam in MP
tray
In the fuser area or
Paper Jam in exit
around the toner
area
cartridge
In the paper exit area
Paper Jam inside of
machine
In the duplex unit
Paper Jam at the
bottom of duplex
path,
Paper Jam at the
top of duplex path,
Paper Jam inside of
duplex path
In the stacker unit
Paper jam in front of
finisher
In the stacker unit
Paper jam inside
finisher, Paper jam
inside finisher's
duplex
In the stacker unit
Paper jam at exit of
finisher
To avoid tearing the paper, pull the jammed paper out gently and
slowly. Follow the instructions in the following sections to clear the
jam.
GO TO
See "In the multi-
purpose tray" on
page 106.
See "In the optional
tray" on page 103.
See "In the optional
high capacity
feeder" on page 104.
See "In the fuser area
or around the toner
cartridge" on page 106.
See "In the paper exit
area" on page 106.
See "In the duplex unit
area" on page 107.
See "Paper jam in front
of finisher" on
page 107.
See "Paper jam inside
finisher, Paper jam
inside finisher's
duplex" on page 107.
See "Paper jam at exit
of finisher" on
page 108.
In the tray 1
1. Pull out the paper tray to open. After you pull it out completely, lift the
front part of the tray up slightly to release the tray from the machine.
2. Remove the jammed paper by gently pulling it straight out.
Once you remove the jammed paper here, open the side cover and then
close it to clear the error message on the display.
If there is any resistance, and the paper does not move immediately when
you pull, stop pulling. Then:
3. Open the side cover.
Troubleshooting_ 102