Setting The Default Tray And Paper; Changing The Default Settings; Ip Setting Using Setip Program (Windows) - Samsung SCX-6545N Series User Manual

6. Select appropriate option and time.
• Scan Power Save: Turns off the scanner lamp under the glass.
• Low Power Save: Keeps the temperature of the fuser unit under
125 °C, and turns off the fans within the machine except a core fan
for the fuser unit.
• Power Save: Turns off all the fans even for the fuser unit after
certain time.
7. Press OK.

Setting the default tray and paper

You can select the tray and paper you would like to keep using for printing
job. (See "General settings" on page 84.)
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
and press OK. (See "Setting the authentication password" on page 29.)
4. Press the General tab.
5. Press the down arrow to switch the screen and press Tray
Management.
6. Select tray and its options such as paper size and type.
7. Press OK.
If the optional tray is not installed, the tray options on the screen is
grayed out.

Changing the default settings

You can set the default values for copy, fax, email, scan and paper all at
once.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
and press OK. (See "Setting the authentication password" on page 29.)
4. Press the General tab > Default Settings > Default Option.
5. Press the function you want to change, and change its settings.
For example, if you want to change the default setting of the brightness
& darkness for a copy job, press Copy > Darkness and adjust the
brightness & darkness.
6. Press OK.

IP setting using SetIP Program (Windows)

This program is for manually setting the network IP address of your machine
using its MAC address to communicate with the machine. A MAC address is
the hardware serial number of the network interface and can be found in the
Network Configuration Report.
You can only use IPv4 setting for SetIP.
For using SetIP program, disable the computer firewall before continuing by
performing the following:
1. Open Control Panel.
2. Double click Security Center.
3. Click Windows Firewall.
4. Disable the firewall.
Installing the program
1. Insert the driver CD provided along with your machine. When the driver
CD runs automatically, close the window.
2. Start Windows Explorer and open the X drive. (X represents the name
of your CD-ROM drive.)
3. Double-click Application > SetIP.
4. Double-click Setup.exe to install this program.
5. Follow the onscreen instructions to complete the installation.
Starting the program
1. Connect your machine and the computer using network cable.
2. Turned on the machine.
3. From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
4. Click on the icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5. Enter the machine's new information into the configuration window as
follows:
• MAC Address: Find the machine's MAC address from the Network
Configuration Report and enter it without the colons. For example,
00:15:99:29:51:A8 becomes 0015992951A8.
MAC address is a hardware serial number of the machine's
network interface and can be found in the Network Configuration
Report. (See "Printing out the machine's MAC address" on
page 31.)
Getting Started_ 30