Printing A Report - Samsung SCX-6545N Series User Manual

PRINTING A REPORT

You can print a report on the machine's configuration or font list, etc.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Print/Report tab.
OPTION OPTION
Print
Accounting Supplies
Reports Information
Network Auth.
Log Report
Usage Page
Report
Accounting
Report
Standard Acct.
Usage Report
Standard Acct.
Remain Report
Configuration
Report
Report
93 _Machine status and advanced setup
DESCRIPTION
You can print Network
Configuration, PS3 Font List,
PCL Font List and Schedule
Jobs Report. Schedule Jobs
Report shows the job list in
pending, in delayed faxing or the
Mailbox list as well.
You can print the amount of each
category that your machine has
printed so far.
It displays user login IDs and
emails.
You can print the report on the
amount of printouts depending on
the paper size and type.
Prints the report of printing out
count for each login user.
Prints the used amount of
Standard Accounting
Prints the remained amount of
Standard Accounting
You can print a report on the
machine's overall configuration.
OPTION OPTION
Fax Report
Report
(Continue) Fax Report
E-mail
Confirmation
Report
Scan to Server
Confirmation
You can also print machine's status information and browse status
with SyncThru™ Web Service. Open the web browser on your
networked computer and type the IP address of your machine.
When SyncThru™ Web Service opens, click Information > Print
information.
DESCRIPTION
You can set to print the
information of a fax reports.
• Multi Send Report: When you
fax to several destination, set
this option to print a
transmission report. On is to
print every time you send a
fax, the machine prints a
confirmation report. With On-
Error, only when the
transmission error occurred,
the report will be printed out.
•
Fax Send Report
Appearance: You can select
whether the image on the
confirmation report shows or
not.
•
Fax Sent/Received Report:
The machine stores the logs
on each transmission and
prints out every 50 logs with
this option On. It you select
Off, the machine stores the
logs but does not print.
• Fax Send Report: The
machine prints the
confirmation report after each
fax job, only when you send a
fax to one destination.
The report shows the job of
scanning and sending it via Scan
to Email.
• On: The report is printed
whether a job successfully
completed or failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints
the report.
The report shows the job of
scanning and sending it via SMB
and FTP.
• On: The report is printed
whether a job successfully
completed or failed.
• Off: No report is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints
the report.