Samsung SCX-6545N Series User Manual page 150

To verify your printer's IP address or the MAC address, print a
Network Configuration page.
•To find a shared network printer (UNC Path), select Shared
Printer [UNC] and enter the shared name manually or find a
shared printer by clicking the Browse button.
: If you cannot find your machine in network, please turn off the
N
OTE
firewall and click Update.
For Windows operating system, click Start → Control Panel and start
windows firewall, and set this option unactivated. For other operating
system, refer to its on-line guide.
: If you want to set a specific IP address on a specific network
T
IP
printer, click the Set IP Address button. The Set IP Address window
appears. Do as follows:
a. Select a printer to be set with a specific IP address from the list.
b. Configure an IP address, subnet mask, and gateway for the printer
manually and click Configure to set the specific IP address for the
network printer.
• Click Next.
6 Select the components to be installed and click Next.
10
Installing Printer Software in Windows
: You can change the desired installation folder by clicking
N
OTE
[Browse].
7
Select the components to be installed. After selecting the
components, the following window appears. You can also change
the printer name, set the printer to be shared on the network, set
the printer as the default printer, and change the port name of each
printer. Click Next.
To install this software on a server, select the Setting up this
printer on a server checkbox.
8 After the installation is finished, a window appears asking you to
print a test page and to register yourself as a user of Samsung
Printers in order to receive information from Samsung. If you so
desire, select the corresponding checkbox(es) and click Finish.
Otherwise, just click Finish.
: After setup is complete, if your printer driver doesn't work
N
OTE
properly, reinstall the printer driver. See "Reinstalling Printer Software"
on page 11.