Machine's Basic Settings; Altitude Adjustment; Setting The Authentication Password; Setting The Date And Time - Samsung SCX-6545N Series User Manual

MACHINE'S BASIC SETTINGS

After installation is complete, you may want to set the machine's default
settings. Refer to the next section if you would like to set or change values.

Altitude adjustment

The print quality is affected by atmospheric pressure, which is determined
by the height of the machine above sea level. The following information will
guide you on how to set your machine to the best print quality or best quality
of print.
Before you set the altitude value, find the altitude where you are using the
machine.
0
1. Enter your machine's IP address as the URL in a browser and click Go
to access the web site of your machine.
2. Log in to the SyncThru™ Web Service as an administrator. (See
"Managing your machine from the website" on page 99.)
3. Click Settings > Machine Settings > System > Setup > Altitude Adj.
4. Select the appropriate altitude value.
5. Click Apply.

Setting the authentication password

To set your machine up or change the settings, you have to login. To
change password, follow the next steps.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password. Touch the password
input area, then the question marks appears, use the number keypad on
the control panel to enter the password. Then, press OK. (Factory
setting:1111)
4. Press the Setup tab > Authentication.
5. Press Change Admin. Password.
6. Enter old and new password, and then confirm the new password.
29 _Getting Started
7. Press OK.

Setting the date and time

When you set the time and date, they are used in Delay fax and Delay Print,
also they are printed on reports. If, however, they are not correct, you need
to change it for correct time being.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab > Date & Time > Date & Time.
5. Select date and time using left/right arrows. Or touch the insert area and
6. Press OK.

Changing the display language

1 Normal
To change the language that appears on the display, refer to the following
2 High 1
steps.
3 High 2
1. Press Machine Setup on the control panel.
4 High 3
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press the down arrow to switch the screen and press Language.
6. Select the desired language.
7. Press OK.

Setting job timeout

When there is no input for a certain period of time, the machine exits the
current location. You can set the amount of time the machine will wait.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press Timers.
6. Select System Timeout.
7. Select On.
8. Select a duration using left/right arrows.
9. Press OK.

Using energy saving feature

The machine provides energy saving features.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
4. Press the General tab.
5. Press down arrow to switch the screen, press Power Saver.
If power to the machine is cut off, you need to reset the correct time
and date once the power has been restored.
and press OK. (See "Setting the authentication password" on page 29.)
use the numeric keypad on the control panel.
To change the format of date and time, press Date Format and Time
Format.
and press OK. (See "Setting the authentication password" on page 29.)
and press OK. (See "Setting the authentication password" on page 29.)
• You can set the Held Job Timeout option to over one hour.
and press OK. (See "Setting the authentication password" on page 29.)