English - Philips HR1721 Manual

ENGLISH

6
General description
Blender
A Motor unit
B On/Off/Pulse knob
C Blender jar with level indication
D Blade unit
E Sealing ring
F Lid
G Measuring cup
Mill (types HR1721 and HR1727 only)
H Jar
I Sealing ring
J Blade unit
Filter (types HR1724 and HR1727 only)
K Fruit filter
Important
Read these instructions for use carefully and look at the illustrations before using the appliance.
Keep these instructions for future reference.
General
Check if the voltage indicated on the appliance corresponds to the local mains voltage
before you connect the appliance.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
Philips or similarly qualified persons in order to avoid a hazard.
Always unplug the appliance from the mains before assembling, disassembling or making
adjustments to any of the accessories.
Never switch the appliance on and off by turning the accessories.
Never immerse the motor unit in water or any other fluid, nor rinse it under the tap. Use
only a moist cloth to clean the motor unit.
Never let the appliance run unattended.
Keep the appliance out of the reach of children.
Avoid touching the blades, especially when the appliance is plugged in.The blades are very
sharp!
Never reach into the blender jar with your fingers or an object while the appliance is
running.
Never place the blade unit onto the motor unit without having the (blender or mill) jar
properly attached.
If the blades get stuck, unplug the appliance before removing the ingredients that are
blocking the blades.
If necessary use a spatula to remove food from the wall of the jar after you have switched off the
appliance.
Always make sure that the blade unit is correctly assembled before you plug the appliance in
and switch it on.
Never use any accessories or parts from other manufacturers that have not been specifically
advised by Philips.Your guarantee will become invalid if such accessories or parts have been
used.