Settings Mode - Extech Instruments DO210 User Manual

MIN/MAX Data Recording
When selected, the Data Recording function records the Min/Max readings. To start a data
recording session:
1. Press the REC button once. The REC indicator will appear on the display. Press the REC
button again and REC MAX will display on the screen along with the maximum value.
2. Press the REC button again and the display will show REC MIN and the minimum value will
be displayed.
3. To release the held MAX or MIN reading, press the HOLD button while either the REC MAX
or REC MIN icons are visible; now only the REC icon will be visible. The meter is now
continuing to monitor the highest (MAX) and lowest (MIN) readings but is displaying real
time measurements. To view the MAX and MIN values again use the REC button as
described earlier.
4. To exit the Record mode, press and hold the REC button for at least 2 seconds. The display
will return to the normal operating mode.
Settings Mode
Before accessing the Settings mode ensure that the meter is not in the HOLD or MIN/MAX
Recording modes. To use the Settings mode:
1.
2.
3.
nd Quality Products Online at:
Press and hold the SETTING button for at least 5 seconds (until a beep is heard)
Use the SETTING button to scroll through the Settings options The options are:
HIGH Altitude compensation adjustment
SALt % Salt adjustment
°C/°F Temperature unit selection
OFF Auto power off management
Refer to the following sections for detailed instructions on programming the Setting
mode parameters
GlobalTestSupply
www.
5 DO210-en-GB_v1.2 11/14
.com
sales@GlobalTestSupply.co