Page 1
USER AND INSTALLATION MANUAL Electronic temperature controller KC-FCD-2T IMPORTANT NOTE: Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference.
Page 2
Electronic temperature controller installation and operation manual Electronic temperature controller KC-FCD-2T is suitable for the Clock setting: Enter to the timing off setting, press “M” key, until industrial, commercial and civilian buildings. It controls the fan the “hh” in the “hh:mm” flashes (at that time “TIMING ON” and coils in the terminal of the central air conditioner.
Page 3
3 Alarm WARNING Please correctly wiring as the wiring figure; there are air vent When the temperature of controller is over working tempera- around the temperature controller cover, please install the ture, the “room temp” display area will display “ E1”. controller after painting the wall, for avoiding the water, sand etc.
Need help?
Do you have a question about the KC-FCD-2T and is the answer not in the manual?
Questions and answers