Table of Contents
Advertisement
After calibrating, the number of shots, total number of degrees, and panorama direction can
be specified before pressing "Start" to begin the process.
Tips & Troubleshooting
Below are some more common troubleshooting tips.
For more detailed information see the knowledge base at CamRanger.com/knowledge-
Connection
•
Ensure the iPhone/iPad is connected to the CamRanger WiFi network
•
If the CamRanger mini battery is very low, it may refuse to connect
•
Any camera WiFi connectivity and built-in camera sharing must be disabled
•
The CamRanger mini has the same limitations as any WiFi network and can be negatively
impacted by environmental interference. Strong interference can result in a failure to join
the CamRanger mini WiFi network.
Performance
•
The closer the iPad/iPhone is to the CamRanger mini, the faster image transfer and live
view will be.
•
Environmental interference can reduce performance.
•
Displaying high resolution images requires a lot of device RAM. If the amount of available
RAM is low, then poor performance or crashes may occur. Restarting the iPad/iPhone will
make more RAM available.
•
Exact features are camera dependent. Unfortunately some cameras do not support all the
features as other cameras.
Images
•
Thumbnails are not displayed until after the image has finished saving to the camera's
memory card. This is usually relatively quick, but can take a little while depending on the
memory card speed, image resolution, number of shots taken in succession, etc.
•
Downloading images when shooting RAW images is very quick as the embedded JPG is
transferred and displayed. If display speed is the most important factor, it will be faster to
shoot RAW+small JPG. The small JPG has a lower resolution and can be displayed by the
iPad/iPhone faster.
© CamRanger
US Patent 9712688
base
09/07/18
22
Hide quick links:
Advertisement
Table of Contents
